In this post, we are going to tell you about the Redmi Y1 edl Point /Xioami Y1 Test Point. Edl Point is known as Emergency Download Mode, it is used to unlock the bootloader of the phone. If your phone is locked You unlock your phone’s bootloader, you cannot unlock it, in this process you will have to take your phone to Edl Mode.
If your phone is of Qualcomm processor, then your phone will definitely support EDL Mode or Emergency Download Mode, However, not all Qualcomm based devices support this. However, today, the Meditech Processor Phone is also being used to unlock the bootloader.
The Redmi Y1 is a very good smartphone of the Xiaomi brand, due to its camera quality and battery backup, it runs a lot, the Redmi Y2 comes with a Qualcomm processor, due to which it has become stronger to take it to Edl Mode.
There can be many reasons behind switching to the Redmi Y1 Edl Mode, if you want to flash the stock ROM in your phone or to unlock your phone, then in this case you will need edl mode. If you want to install or update your own Redmi Y1phone then you have many options to flash stock ROM on the device. Redmi Y1 Edl Mode Not Working,You Can Try Two Way Recovery Mode or using fast boot mode.
Redmi Y1 Edl Point – Xiaomi Y1 Test Point
Let’s Seen Redmi Y1Test point image And Follow This Step To Connect Redmi Y1 In Edl Mode.
Redmi Y1Edl Point Use Tools
MI Flash Tools
Miracle Box
UMT Dongle
Where can we use Redmi Y1Edl mode
1. Mi Phone Flashing ( Install Firmware )
2. Mi Account Remove
How To Connect Redmi Y1 In Edl Mode
1. First open back cover of Redmi Y1( Be careful when removing the back cover of the device )
2. Remove To Battery Cable ( Battery not required for EDL mode )
3. Now Use tweezers To Short 2 Red Dot Point, As shown in the image above.
4. Now plug the USB cable On Your Device.
5 . Your phone has now successfully gone into EDL mode, now you can see the Qualcomm HS USB QDLodar 9008 port in your computer.
Warning :
This tutorial is only for educational purpose Only, Using this method will void your phone’s warranty so please do at your own risk. This method is a bit risky, use this method properly, we will not be responsible for the loss due to it.
If You Have Any Problem-Related In This Post Please Below The Comment Box,We will try
